Changes in its Wear Resistance When Alloying Aluminum Alloys with Lithium
Keywords:
quartz sand, furnace, wear, aluminumAbstract
The article investigated the hardness of aluminum alloys of grades AK7 and D16 according to wear resistance when applying a lithium fluoride compound as a flux, changes in abrasive wear resistance of samples. The study was conducted in the laboratory of "Foundry technologies" of the Tashkent State Technical University. Based on the results of the experiments, the authors present their conclusions in the article.
References
Tian-Zhang, Z., Long, J., Yong, X., & Shi-Hong, Z. (2020). Anisotropic yielding stress of 2198 Al–Li alloy sheet and mechanisms. Materials Science and Engineering: A, 771, 138572.
Nodir, T., Sarvar, T., Kamaldjan, K., Shirinkhon, T., Shavkat, A., & Mukhammadali, A. (2022). THE EFFECT OF LITHIUM CONTENT ON THE MASS OF THE PART WHEN ALLOYED WITH LITHIUM ALUMINUM. International Journal of Mechatronics and Applied Mechanics, 2022(11), 52–56. https://doi.org/10.17683/ijomam/issue11.7
Tursunbaev, S., Umarova, D., Kuchkorova, M., & Baydullaev, A. (2022). Study of machining accuracy in ultrasonic elliptical vibration cutting of alloyed iron alloy carbon with a germanium. Journal of Physics: Conference Series, 2176(1). https://doi.org/10.1088/1742-6596/2176/1/012053
Tursunbaev, S., Turakhodjaev, N., Turakhujaeva, S., Ozodova, S., Hudoykulov, S., & Turakhujaeva, A. (2022). Reduction of gas porosity when alloying A000 grade aluminum with lithium fluoride. IOP Conference Series: Earth and Environmental Science, 1076(1). https://doi.org/10.1088/1755-1315/1076/1/012076
Cisko, A. R., Jordon, J. B., Avery, D. Z., McClelland, Z. B., Liu, T., Rushing, T. W., ... & Garcia, L. (2019). Characterization of fatigue behavior of Al-Li alloy 2099. Materials Characterization, 151, 496-505. Cisko A. R. et al. Characterization of fatigue behavior of Al-Li alloy 2099 //Materials Characterization. – 2019. – Т. 151. – С. 496-505.
Turakhodjaev, N., Akramov, M., Turakhujaeva, S., Tursunbaev, S., Turakhujaeva, A., & Kamalov, J. (2021). Calculation of the heat exchange process for geometric parameters. International Journal of Mechatronics and Applied Mechanics, 1(9), 90–95. https://doi.org/10.17683/IJOMAM/ISSUE9.13
Qian, B., Zheng, H., Wu, R., Hou, L., Zhang, J., & Sun, J. (2022). Grain Refinement Behavior of Accumulative Roll Bonding-Processed Mg-14Li-3Al-2Gd Alloy. Journal of Materials Engineering and Performance, 31(8), 6617–6625. https://doi.org/10.1007/s11665-022-06757-w
Sarvar, T., Nodir, T., & Sharofuddin, M. (2022). Changes in the Hardness of Aluminum Alloys in the Influence of Lithium. Eurasian Journal of Engineering and Technology, 8, 56-60.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
User Rights
Under the Creative Commons Attribution-NonCommercial 4.0 International (CC-BY-NC), the author (s) and users are free to share (copy, distribute and transmit the contribution).
Rights of Authors
Authors retain the following rights:
1. Copyright and other proprietary rights relating to the article, such as patent rights,
2. the right to use the substance of the article in future works, including lectures and books,
3. the right to reproduce the article for own purposes, provided the copies are not offered for sale,
4. the right to self-archive the article.
